Zeiss OPMI Pentero Bedienungsanleitung PDF herunterladen (Seite 108)

108 Preparations for use

G-30-1458-en OPMI® Pentero® Software Release 2.20 / 2.21 Issue 11.1

Printed on 18. 02. 2009

The brake release buttons are located on the back of the handgrips.

1 Brake release button (AB)

Brake release button for all suspension system and microscope axes.

For as long as you press this button, all magnetic brakes are released

("All Brakes") and the system can be moved in all directions. When

you let go of the button, the magnetic brakes simultaneously lock all

axes in position.

2 Brake release button (SB)

Brake release button for the microscope axes or suspension system

axes (factory setting). For as long as you press this button, only the

magnetic brakes of the suspension system or microscope axes are re-

leased ("Selected Brakes"), and the microscope can be moved in all

directions. When you let go of the button, the magnetic brakes simul-

taneously lock these axes in position.

Configuring the SB break release button

The CONFIG menu / STAND / BRAKES permits you to select whether the

SB button should release the microscope or the suspension system axes.

Select the axes which you want to be released when you press SB button

(2) on the handgrip. You have the following options:

Configuring the Autofocus (AF) function

You can configure the AF function in such a way that

– the autofocus is automatically activated after the brakes have been

locked,

– the autofocus is not linked with the brake function, and can only be ac-

tivated using a button on the handgrip.

• Select "On" button (5) in CONFIG menu / OPMI / FOCUS for automat-

ic activation of the autofocus after locking of the brakes. If you select

"Off" button (5), the autofocus can only be activated using a button on

the handgrip or foot control unit.

Note:

When using a micromanipulator from another manufacturer, activate the

"Focus Stop" function. This ensures that the selected focus setting is not

inadvertently changed by the motorized function (see page 56).

3 Axes 1-2-3 Suspension system axes

4 Axes 4-5-6 Microscope axes (factory setting)

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 417 418

Keine Kommentare

Zeiss OPMI Pentero Bedienungsanleitung Seite 108