Zeiss Axiolab A Bedienerhandbuch PDF herunterladen (Seite 40)

Carl Zeiss Axiolab A

2-6 B 40-015 e 06/99

2.5

Attachment of Reflected-Light Halogen

Illuminator

• Attach dovetail guide (2-4/3) of 6 V, 30 W

halogen lamp (2-4/4) to the microscope stand

and tighten hexagonal screw (2-4/2) using the

SW 3 screwdriver (2-4/1).

☞

The halogen lamp must be mounted

to the stand in a vertical position, also

see Fig. 3-2.

For visual control, remove lamp cover

(2-4/4) by slightly turning it to the left.

• Connect cable (2-4/5) to the two sockets on the

instrument rear.

2.6

Retrofit the Transmitted-Light Halogen

Illumination

Transmitted-light observation with the Axiolab A is

possible with the configuration described in

section 1.3. The pure reflected-light versions of the

Axiolab A can also be upgraded for transmitted-

light observation by installing the ”Retrofit

package for transmitted light” (1-4/7).

☞

The transmitted-light illumination equipment can be subsequently mounted to the Axiolab A

only by Carl Zeiss service personnel.

The transmitted-light illumination package consists of:

- mechanical stage 75 × 35 R/A with ceramic surface and short drive,

- specimen holder with spring clip R,

- transmitted-light illuminator, containing halogen lamp with mount and luminous-field diaphragm with

iris,

- ABBE condenser 0.9/1.25 or ABBE condenser 0.9/1.25 with 5-position turret disk

Fig. 2-4 Attachment of reflected-light

halogen illuminator

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Keine Kommentare

Zeiss Axiolab A Bedienerhandbuch Seite 40