Zeiss Axiolab A Bedienerhandbuch PDF herunterladen (Seite 72)

Carl Zeiss Axiolab A

4-6 B 40-015 e 06/99

(3) Changing the 6 V, 30 W Transmitted-

Light Halogen Lamp

The following procedure is required to change the

lamp of the integrated 6 V, 30 W illuminator:

• Switch off the extern lamp supply; if required,

allow the illuminator to cool down for approx.

15 minutes.

• Disconnect the line cable from the line.

• Hold the ventilation grille (4-3/1) on its grip and

pull it off in upward direction.

• Remove the lamp insert by pressing its handle

(4-3/2) together.

• Replace the halogen lamp 6 V, 30 W (4-3/3).

☞

Do not touch the lamp bulb with your bare hands; if required, clean the bulb using pure

alcohol before switching it on for the first time to prevent dirt from burning in.

• Make sure that the lamp carrier plate exactly fits the positioning pins.

• Attach lamp insert again by slightly pressing the handle together

• Attach ventilation grille again until stop.

4.3

Requesting Service

All repairs of mechanical, optical or electronic components inside the instrument and of the electrical

components of the Axiolab A may only be performed by Carl Zeiss service staff or specially authorized

personnel.

To ensure the optimum setting and trouble-free function of your microscope even for a longer period of

time, we would recommend you to conclude a service/maintenance contract with Carl Zeiss.

In the case of subsequent orders or when service is required, please get in touch with your local Carl

Zeiss agency.

Fig. 4-3 Changing the 6 V, 30 W

transmitted-light halogen lamp

1 2 ... 67 68 69 70 71 72 73 74 75 76

Keine Kommentare

Zeiss Axiolab A Bedienerhandbuch Seite 72