Zeiss Axiolab A Bedienerhandbuch PDF herunterladen (Seite 61)

Axiolab A Carl Zeiss

B 40-015 e 06/99 3-19

3.5.1

Attachment of Photomicrography Equipment

(1) Attachment of SLR Camera, e.g. CONTAX 167 MT

• Screw T2 adapter for the CONTAX bayonet (3-

16/3) on the 2.5× connector for T2 (3-16/4)

(456005-0000-000).

• Attach the camera housing (3-16/2) and the

cable release (3-16/1), if required.

• Loosen the three hexagonal screws (3-16/6) to

remove the dust cover (3-16/8) from the

camera tube (3-16/5) and insert the

premounted unit A in the camera tube.

• Align the camera unit in the required position

and tighten the three hexagonal screws (3-

16/6).

• Pull out pushrod (3-16/7) completely for

photomicrography.

• When artificial-light color reversal film is used,

the CB 3 conversion filter provides the correct

color temperature of 3200 K.

• For daylight color reversal film, the CB 12

conversion filter must be used in addition to the

CB 3 conversion filter.

☞

If focusing is not to be made via the

viewfinder of the camera, the

component with the eyepiece reticle

must be screwed in the eyepieces (see

sections 1.5 and 2.3.1).

Fig. 3-16 Attachment of SLR camera, e.g.

CONTAX 167 MT

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 75 76

Keine Kommentare

Zeiss Axiolab A Bedienerhandbuch Seite 61