Zeiss Axiolab A Bedienerhandbuch PDF herunterladen (Seite 45)

Axiolab A Carl Zeiss

B 40-015 e 06/99 3-3

OPERATION

3.1

Switch on the Instrument

• Switch on the instrument via the on/off switch

(3-1/6).

− The green line control lamp in the switch (3-

1/6) must light up.

− The halogen lamp 6 V, 30 W in the

reflected-light illuminator (3-1/2) must light

up.

☞

The “I” is visible when the on/off

switch is switched on and the "0" is

visible when the on/off switch is

switched off.

• Set the required image brightness via the

illuminance control (3-1/5).

• Depending on what is required, insert

attenuation or conversion filter in the filter

slider (3-1/3) and push the slider in the beam

path (also see section 2.7).

• Swing required objective (3-1/7) in the beam

path; make sure to operate the nosepiece only

via the knurled ring.

☞

For observation, the pushrod (3-1/4) must be pushed in. In this position, 100 % of the light of

the beam path is directed to the observation port of the binocular tube (3-1/1).

Fig. 3-1 Switch on the instrument

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Keine Kommentare

Zeiss Axiolab A Bedienerhandbuch Seite 45